Premium Automotive Detailing & Care in Central Switzerland · LU

Deionized Water for Vehicle Care at Koenigsegg Switzerland: The Customized Solution for Flawless Perfection

At Koenigsegg Switzerland in Adligenswil, there was a need for the purest, demineralized water to ensure a flawless finish after car washing. After a detailed analysis of the specific requirements, we implemented a customized, compact, and highly efficient solution using the VE-50 cartridge. The result: uncompromising water quality for the perfect finish on these automotive masterpieces.

Project at a Glance

A concise summary of the key facts.

Industry
Exclusive Sports Cars / Hypercars
Customer
Koenigsegg Switzerland
Location
Adligenswil, Lucerne (Service Location)
Application
Demineralized Water for Vehicle Finishing
Raw Water Conductivity
280 µS/cm
Raw Water Hardness
18 °fH
Water Consumption
15–20 liters per vehicle · 2–4 washes per week
Installed System
VE-50 Cartridge
Output Conductance
~1 µS/cm
Output Hardness
0 °fH
Expected service life
15 years
Project Duration
February–March 2026
Consulting & Implementation
Philipp Bieri, Technical Sales Consultant

Customer Feedback

„Frei AquaService didn’t recommend the most expensive solution, but rather the one that best suited our needs. This expert advice is exactly what we’re looking for—pragmatic, honest, and to the point.»

— Kim Struve, CEO of Koenigsegg Switzerland

Starting Point: A Perfect Finish Without Limescale or Water Stains

Koenigsegg Switzerland needed a solution for producing demineralized water for its service location in Adligenswil. Goal: To rinse vehicles with demineralized water after the main wash cycle to achieve a perfect finish without limescale or water spots—a standard that goes without saying for a brand like Koenigsegg.

The baseline values on site were clearly defined:

  • 2 to 4 car washes per week
  • Conductivity of the raw water: 280 µS/cm
  • Water hardness: 18 °fH
  • Approx. 15–20 liters of deionized water per vehicle for the final rinse

Challenge: Determining the Right System Size

Before our on-site visit, a competitor had already offered a high-performance reverse osmosis system. However, during the needs assessment with Mr. Struve, it quickly became clear that the customer wasn’t looking for the largest possible system, but rather a solution tailored precisely to his needs.

 

It is precisely in this situation that it becomes clear whether a solution makes economic sense—or whether the customer is paying for an oversized solution that they don't even need.

Project Workflow: From Initial Inquiry to Commissioning

A clear overview from the initial contact through to the completed installation.

  • February 24, 2026 – Initial inquiry via the Frei AquaService website
  • February 25, 2026 – On-site meeting with Mr. Struve, needs assessment, and preparation of a quote on the same day
  • February 26, 2026 – Order confirmation from Koenigsegg Switzerland
  • March 10, 2026 – Installation and Commissioning of the VE-50 Cartridge

It took about two weeks from the initial inquiry to the completion of the fully operational system.

Our Solution: The VE-50 Cartridge

Based on the actual consumption figures, we calculated that a VE-50 cartridge is entirely sufficient for the intended application. Given these water parameters, its capacity allows for the treatment of approximately 500 vehicles before the resin needs to be replaced.

 

This makes the solution significantly more cost-effective than a complete reverse osmosis system, while still providing customers with the water quality needed for a perfect car finish.

Measurable results before and after treatment

Water quality was verified on-site using measurement techniques. The results speak for themselves:

  • Conductance: 280 µS/cm in raw water → approx. 1 µS/cm after processing (reduction via 99 %).
  • Water hardness: 18 °fH in raw water → 0 °fH after the VE cartridge.

In practice, these values mean that no mineral residue remains on the paint after drying—resulting in a perfectly spotless finish.

Result: Substantial savings while maintaining the same water quality

By using the VE-50 cartridge, Koenigsegg Switzerland was able to achieve significant cost savings compared to the reverse osmosis system originally proposed—without compromising the water quality required for the vehicle’s finish.

  • Investment costs: a fraction of those of a comparable reverse osmosis solution
  • No wastewater: Unlike reverse osmosis, the cartridge produces no rinse water losses
  • Expected service life of the system setup: approximately 15 years

Resin Cartridge or Reverse Osmosis—When to Use Which?

Both technologies have their merits. Which solution is the right one depends on the specific water consumption and usage profile. Here is a clear comparison:

CriterionVE-50 Cartridge (selected)Reverse osmosis system
Space requirementsVery compactSignificantly larger
WastewaterNoneRinse Water Loss
MaintenanceResin Replacement OnlyMembrane Service, Filter Replacement, Cleaning
Behavior During a StandstillNo problemDamages the membranes
A good starting point isUp to about 100 l/dayStarting at about 100 liters per day, 5 days a week
Life~15 years (housing)7–12 years (depending on the membrane)

About the Person in Charge

Technical consulting and project implementation were provided by:

Philipp Bieri – sales consultant of Frei AquaService for the regions of Bern, Romandie, specializing in customized solutions for water softening.

Philipp Bieri

Technical Sales Consultant

Frei AquaService AG

Your Specialist
Bern, French-speaking Switzerland, and industrial facilities.
Frei AquaService AG – Available 24/7 throughout Switzerland.

„If you know exactly what a system’s actual needs are, you can size it appropriately. It would have been easier to sell a larger system—but in the long run, it’s better for both sides if the solution is economically and technically tailored to the needs.«

— Philipp Bieri, on the consulting philosophy

Frequently Asked Questions About Deionized Water for Car Care

This FAQ section focuses on Google Featured Snippets and addresses common questions about deionized water, filter cartridges, and reverse osmosis.

What is demineralized water, and why is it important for car care?

Demineralized water (deionized water) contains no dissolved minerals. As a result, no limescale or water spots remain on the paint when the vehicle dries—a prerequisite for a professional vehicle finish, especially on dark or high-quality paint jobs.

When is a reverse osmosis cartridge a better solution than a reverse osmosis system?

For moderate water consumption—as a general guideline, up to about 100 liters per day, 5 days a week—a deionization cartridge is usually more cost-effective. It saves space, produces no wastewater, and has no issues with membrane fouling. For significantly higher consumption levels, a reverse osmosis system becomes a more attractive option.

How long does a VE-50 cartridge last?

The service life depends directly on the inlet conductivity and the volume of water drawn. Based on the specific values in this case study (280 µS/cm raw water, 15–20 liters per vehicle), one cartridge is sufficient for approximately 500 vehicles. The resin is typically replaced about once a year.

What kind of water quality is needed for a perfect vehicle finish?

For a streak-free finish, the rinse water should have a conductivity of less than 10 µS/cm. With a properly sized deionization cartridge, values around 1 µS/cm can be achieved—which is far better than what is practically required.

Thanks to Our Customers

A big thank you to Koenigsegg Switzerland, and especially to Mr. Kim Struve, for the trust they have placed in us and for the pleasant, solution-oriented collaboration.

Frei AquaService AG
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.